If you are running a Windows OS, these items are automatically updated whenever you make changes to the Windows Date and Time Properties utility. Click Next run the Installation Wizard. Refer to the Utility Folder Installation Notes later in this chapter. PCI bit add-on card slot Please refer to the usage FAQ for more tips. Refer to Windows online help for information on creating a bootable system disk. Ensure that the edge connector is correctly seated in the slot.

Uploader: Bralar
Date Added: 17 December 2016
File Size: 55.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5724
Price: Free* [*Free Regsitration Required]

Click to set the BIOS. The second jack is for stereo line-out signal.

ECS G41T-M5 motherboard |

Install the edge connector of the add-on card into the expansion slot. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Make g41tt-m5 to remove any unused screws or other metal objects such as screwdrivers from the inside PC case. Change Supervisor Password mnlk: Here are some basic PC care tips to help prolong the life of the motherboard and keep it running as best as it can.

Drivers and software are automatically installed in sequence.

This concludes Chapter 4. Chassis Opened No This item indicates whether the case has been opened. Be careful not to touch the contacts. Ends your session and turns off the computer. Other options lead to dialog boxes that prompt you for information.


Ensure that the edge connector is correctly seated in the slot. You must use an ATX power supply in order to use this feature.

Boot Other Device Yes When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second and Third boot devices. Installing the G4t1-m5 8 Do not over-tighten the screws as this can stress the motherboard. The total memory capacity is up to 8 GB.

Install any remaining DIMM modules.

It does not support RAID configuration and the onboard pin floppy drives. Select a root directory.

ECS G41T-M5 – 1.0 – motherboard – micro ATX – LGA775 Socket – G41

Use these items to configure each device on the SATA channel. A bent pin may cause failure to boot and sometimes permanent damage from short circuit. Changes to system hardware such as different CPU, memories, etc. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

These connectors are well designed and will only fit in one orientation. The keyboard language selection list offers several more regional keyboard setups to switch with the default English typing.


Click to enter the normal OS you have installed such as Windows. The devices showed here will be different depending on the exact devices installed on your motherboard.

ECS G41T-M5 V1.0 Realtek LAN Driver

Parallel Port Address Use this item to enable or disable the onboard Parallel port, and to assign a lwn address. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard. Use the cursor arrow keys to scroll through the items in the y41t-m5.

The switch should maintain contact for at least 50 ms to signal the power supply to switch on or off. Supervisor Password This page helps you install or change a password. If you choose Normal mode, the fan speed will be auto adjusted depending on the CPU temperature.